Fiber Cement Board/Tile/Calcium Silicate Board Production Line
SINOPOWER-SINOMA a Chinese government owned company, which was established in 1965 and is the biggest fiber cement board machinery supplier in China. During the past 50 years, we have built more than 200 fiber cement board production lines both in China and abroad. We can supply complete set of equipments and accessories for fiber cement board production lines with capacity from 3 million m2/y to 8 million m2/y. Both flow-on and Hatschek process can be provided.
Product Name
|
FIBER CEMENT BOARD PRODUCTION LINE MACHINERY
|
Material
|
Steel, stainless steel
|
Color
|
Can be customerized
|
Standard
|
GB- CHINA NATIONAL STANDARD
|
Used
|
Building Material Industry Machinery
|
Technical Details
|
01 Sand Preparation Section
|
10 Green Sheet Receiving Section
|
19 Drying System
|
02 Pulp Preparation Section
|
11 Stacking Section
|
20 Thickness Sorting System
|
03 Cement & Auxiliary Material Silo
|
12 Waste Material Recycle System
|
21 Sanding Section
|
04 Sand Slurry Storage Tank
|
13 Pressing System
|
22 Edging and Chamfering Section
|
05 Cellulose Pulp Storage Pool
|
14 Pre-curing Section
|
23 Packing and Loading Section
|
06 Batching Section
|
15 Re-stacking Section
|
24 Boiler System
|
07 Clean and Recycle Water Tank
|
16 Cleaning and Oiling Section
|
25 Air Compressor System
|
08 Sheeting Section
|
17 Autoclave System
|
26 Central Control Room
|
09 Flocculant System
|
18 De-stacking Section
|
Flow-on Process
|
|||
The flow-on process is a method of producing fiber cement products, which uses high concentration slurry to lay
on the felt, and the slurry is subjected to vacuum filtration, dehydration, and extrusion molding for many times to form a green sheet of the product. |
Specification
|
Characteristics of flow-on process:
1. The equipment is relatively simple and lower cost 2. Low energy consumption and operation cost 3. Easy operation and convenient maintenance 4. Low adaptability of raw materials 5. Low water consumption and loss of raw materials Capacity:
Annual production of 3 & 5 million square meters
Double width sheeting machine has an annual production of 8 – 10 million square meters |
||
Forming Drum Size
|
Ф1650×1750mm
|
||
Felt speed
|
40-90m/min
|
||
Forming drum linear pressure
|
700N/cm(max)
|
||
Main drive motor power
|
55-90kw
|
||
Felt washing water pressure
|
0.8-1.5MPa
|
||
Vacuum boxes quantity
|
8-10 Unit
|
||
Weight of equipment
|
35t
|
Hatshek Process
|
|||
The hatschek process is another method of producing fiber cement products. As the clean sieve is pulled under
the slurry in the vat(usually 3 – 5 vats) , water from the slurry runs through the sieve depositing a thin film on the surface of the sieve, and the film lays continuously on the felt to become the green sheet. |
Specification
|
Characteristics of hatschek process:1. Good uniformity of green sheet thickness
2. Good surface appearance and smoothnessCapacity: Annual production of 3 & 5 million square meters |
||
Forming drum size
|
Ф1650×1750mm
|
||
Felt speed
|
40-90m/min
|
||
Forming drum linear pressure
|
700N/cm(max)
|
||
Felt washing water pressure
|
0.8-1.5MPa
|
||
Main drive motor power
|
55-90kw
|
||
Vats quantity
|
3-6 units
|
||
Weight of equipment
|
50t
|