The cutting system consists of vertical cutting machine, horizontal cutting machine, lifting cutting machine, purging and cutting device, side brush, adjustable fully enclosed rail system, cover plate and cutter system.
(1)Use and characteristics: After demoulding, the green cake is placed on a cutting trolley, and the cutting trolley-mounted green cake is driven by a servo motor to realize six-sided cutting of the green cake to reach a set specification (length-2mm-width -1mm-height-1mm) through vertical cutting, horizontal cutting, lifting cutting and other processes. The trolley continues to move forward to the tilting table to remove the bottom waste part.
(2)Technical performance and characteristics
General technical requirements of cutting machine:
Cutting machinesional accuracy of the cut block can reach 0-2mm in length, 0-1mm in width and 0-1mm in height.
are manufactured according to the latest industry standards.
The dimensThe cutting unit and supporting equipment are designed to have a net green cake size of 4.8mx1.2mx0.6m & 6m×1.2m×0.6 m .
The cutting machine can cut the cake on six surfaces.
Cutting machine can produce B03-07 grade products.
In order to ensure the cutting accuracy, the guide rail adopts 60KG heavy rail and is machined and adjustable. At the same time, the rail automatic compensation and cleaning device is required.
The cutting machine adopts the water flushing process to recover the leftover materials and bread heads generated during cutting.
The steel wire of horizontal cutting machine and lifting cutting machine adopts 5mm carry, the air cylinder is tensioned, and the swing and lifting of horizontal cutting adopt frequency conversion speed regulation.
Appearance requirements of cutting machine:
The paint surface is clean and smooth, and the color and luster are coordinated.
The plated parts are uniform in color and luster, firmly attached, and free from plating leakage and peeling.
Welding conforms to relevant national standards.
No mechanical damage.
Nameplates and marks are clear and correct.
2.1.1 Vertical cutting machine of AAC block and panel machine
Vertical cutting machine
|
Cutting accuracy: length 0—-2mm. |
The cutting size of the cake 600mm can be adjusted at will and manually. | |
It can realize any switching function of blocks and panel. | |
The cutting tool of the panel can be quickly replaced. | |
There is an automatic waste washing device. The cutting machine runs smoothly without shaking or jamming, and the surface of the cake has no wavy lines. | |
It has the function of producing panel of any specification: inner wall panel, outer wall panel, roof panel, floor panel, T-shaped panel, C-shaped panel, L-shaped panel, etc. | |
It is designed according to international most advanced technology concept. | |
2.1.2 Horizontal cutting machine of AAC block and panel machine
Horizontal cutting machine |
Cutting accuracy: thickness 0-1 mm. |
It can cut 50mm panel with the whole mould, and the cutting machine runs smoothly without shaking or jamming. | |
It can realize any switching function of blocks and panel. | |
It has the function of quickly replacing cutting steel wires. | |
There is an automatic cleaning device for waste aggregates on the steel wire . | |
It has the function of producing panel of any specification: inner wall panel, outer wall panel, roof panel, floor panel, T-shaped panel, C-shaped panel, L-shaped panel, etc. | |
It is designed according to international most advanced technology concept. | |
2.1.3Lifting cutting machine of AAC block and panel machine
Post time: May-22-2020